GOVERNORS, TENSION SHEAVE ASSEMBLY AND GOVERNOR
ROPE CLAMP |
|
| Bidirectional Self-Resetting /
Remote-Set Governors for Roped Hydraulic Elevators |
Self-Resetting/Remote-Set Governor is designed
to test the safeties from the machine room. A momentary switch on the controller trips the
governor. The governor and the safeties are then unlocked by upward movement of the car.
This governor is most effective on Roped Hydraulic projects where the use of a
governor access door is impossible or undesirable. Normally mounted in the overhead, this
type of governor may also be mounted in the pit, when clearances allow. State and local
codes for the project area must allow self-resetting/ remote-set governors without access
doors. In addition, certain large capacity cars or elevators with high speeds may not be
able to utilize this style of governor. Please contact us for more details.
Note: Not approved in some US jurisdictions. Certifications
available upon request. |
 Remote-Set
Governors PDF flyer.
|
Common Features
• Bidirectional rotation and tripping
• 24VDC remote set solenoid
• CSA, UL, IP67 safety switch
• Manual reset safety switch, 1NC/1NO, 3A 400VAC
• Hardened running groove for 1/4" or 3/8" rope
• Test sheave for simulated tripping
• Dismountable base plate
• Safety cover LK-COVER available, not included
LK 200 Features
• Sheave groove for 1/4" (6-6.5 mm) rope
• Main sheave 8.15”Dia. (207 mm)
• Test sheave 5.67”Dia. (144 mm)
• Dimensions 9.5”W x 14.6”H x 8.7”D
• Weight 36 Lb.
LK 315 Features
• Sheave groove for 3/8" (8-10 mm) rope
• Main sheave 12.40”Dia. (315 mm)
• Test sheave 8.66”Dia, (220 mm)
• Dimensions 12.4”W x 14.6”H x 8.7”D
• Weight 41 Lb.
Type "R" Features
• 24VDC remote reset/ manual reset safety switch
• 1NC, 3A 400VAC |
LK-315, LK-COVER
|
| Model |
Trip Speed
FPM |
Safety Switch
Reset |
|
LK 200 63 |
63 |
Manual |
|
LK 200 75 |
75 |
Manual |
|
LK 315 |
175 |
Manual |
|
LK 315-210 |
210 |
Manual |
|
LK 315-280 |
280 |
Manual |
|
LK 315-337 |
337 |
Manual |
|
LK 315-415 |
415 |
Manual |
|
| Model |
Trip Speed
FPM |
Safety Switch
Reset |
|
LK 315-452 |
452 |
Manual |
|
LK 315-475 |
475 |
Manual |
|
LK 315-175R |
175 |
Remote or Manual |
|
LK 315-210R |
210 |
Remote or Manual |
|
LK 315-280R |
280 |
Remote or Manual |
|
LK 315-337R |
337 |
Remote or Manual |
|
LK 315-452R |
452 |
Remote or Manual |
|
LK-Governor Replacement
Parts and Accessories
Model LK-COVER
• Heavy duty, injection molded, semi-transparent governor plastic safety cover,
1/8" wall, 15.2"W x 14.2"H x 11.2"D.
Model LK-REMOTE
• 24VDC, remote set solenoid.
Model LK-SWITCH
• Manual reset safety switch, 1NC/1NO, 3A 400VAC. |
| Commercial Governor for
“A” and “B” Safeties |
| Westinghouse Style Elevator
Governor is a commercial governor for Type A and Type B Safeties. This Overspeed Governor
designed for elevator speeds up to 350 FPM. Pull-through is adjustable from 330 to 550
pounds-force. Governor meets ASME A17.1 Code, comes with a UL Overspeed manual reset
switch, automatic mechanical reset installed and active, and safety enclosure. Automatic
mechanical reset can be removed and governor will require a manual reset after lock
activation. Each governor preset to 400 LB pull-through force, electrical switch trip
speed, mechanical lock trip speed, tested and sealed in the USA. Governor weight is 75 LB. |
Commercial
Governor PDF flyer.
|
• ASME A17.1 Code Compliant
• Type A and B compatible
• Elevator speed up to 350 FPM
• Manual reset Overspeed electrical switch
• UL Overspeed switch NC, 2A @ 230VAC
• Electrical switch tripping speed 155 - 407 FPM
• Automatic or manual mechanical lock reset
• Mechanical lock tripping speed 175 - 452 FPM
• Pull through force 400 LB, factory adjusted
• Ductile cast iron wheel, 12” Dia. with 3/8" groove
• Designed for 3/8” 8x19 traction steel cable
• Safety enclosure 13.8”H x 7.8”W x 24.3”L, included
• Enclosure weight 24 LB • Governor weight 75 LB
| Model |
Rated
Car Speed
FPM |
Electrical
Trip Speed
FPM |
Mechanical
Trip Speed
FPM |
| CM-2685 |
0-125 |
155 |
175 |
| CM-2685-210 |
150 |
187 |
210 |
| CM-2685-280 |
200 |
252 |
280 |
| CM-2685-337 |
250 |
303 |
337 |
| CM-2685-452 |
350 |
407 |
452 |
|
CM-2685
CM cover |
| Tension Weight and Sheave
Assembly for Elevator Overspeed Governors |
Tension
Weight Sheave Assembly PDF flyer.
|
CEMTSH
|
Model CEMTSH
Horizontal or swing type tension weight designed to mount on the guide rail with two rail
clips. Tension weight can be moved on the support arm to one of three positions. Depending
on the position of the tension weight, the weight on pulley or tensile force can be 78.5
Lb, 83 Lb, and 87.5 Lb. Tension weight, sheave, sheave guard, mounting plate assembly, and
set of two rail clips, bolts, nuts and lock washers are included.
Mounting plate with custom offsets can be made, please inquire. |
• Rope size: 3/8”
• Rail size: 8 Lb/Ft, 12 Lb/Ft
• Sheave diameter: 12-3/8”, 12” nominal
• Offset distance
• Rail base to rope CL: 1.0” or 1.25”
• Rail (8 Lb/Ft) CL to rope CL: 6.0”, adjustment ±0.7”
• Rail (12 Lb/Ft) CL to rope CL: 6.0”, adjustment ±0.1”
• Weight
• Weight on sheave: 83 Lb, adjustment ±4.5 Lb.
• Tension weight: 22.6 Lb.
• Total weight: 45 Lb. |
Model GRC-2006
The Governor Rope Clamp designed for use during the 5-year test of the Governor Pull-Out
and the Pull-Through to comply with A17.2-2004 part 2, Item 2.13.2 (b) (5).
The Rope Clamp two (2) plates are applied to opposite sides of the governor rope using two
(2) 10" curved jaws locking pliers.
The plates are made of 6061 T-6 clear anodized aluminum. Plate dimensions: 5-1/4"L x
2.0"W x 0.75"D.
Two (2) plates and one (1) shackle are included. Locking pliers Model 6C661 are not included but available.
In a position best suited to lift the cable with a come-along, to ensure sufficient slack
to spin the governor sheave.
The GRC-2006 can also be used during the testing of the governor pull through. Apply the
GRC-2006 to the governor rope using two (2) 10" curved jaws locking pliers, (as
shown) and attach your come-along and dynamometer.
Model DYN-1000 recommended.
6C661
|
Governor Rope
Clamp PDF flyer.
|
GRC-2006 Bottom View
|
GRC-2006 Side View
|
|
|
|
